How do I apply my EMF Nano Shield Sticker?
Application is simple. Make sure the surface where you're applying the sticker is clean and dry. Peel the backing, then place the sticker on the back of your device or surface and press firmly for a few seconds to secure the adhesive.
The sticker is designed for permanent placement and is not intended to be repositioned once applied. Apply it to the back of your phone case, the underside of your laptop, the back of your router, or any non-screen surface of the device you want to harmonize. Do not apply directly onto screens or display panels.
What does the EMF Sticker do?
The Schumann EMF Sticker is designed to harmonize electromagnetic radiation from the personal electronics you use most. Phones, laptops, tablets, routers, baby monitors. It uses a multi-layer nano construction with 24K gold and absorptive mineral layers to convert chaotic EMF peaks into more coherent waves. It doesn't block your signal or drain your battery. It works passively and silently within a local range of about 30 cm, specifically to reduce localized electromagnetic exposure right where you're holding or sitting near a device.
Will it affect my cell service or Wi-Fi?
No. The sticker does not block, disrupt, or interfere with any connectivity. Your calls, Wi-Fi, Bluetooth, and data all work exactly the same. Unlike signal-blocking products that kill your reception and drain your battery trying to reconnect, our sticker harmonizes the radiation without affecting device function. You won't notice any change in how your phone or laptop performs.
How long does it last?
The sticker's energetic imprint is permanent. It doesn't wear out, degrade, or need recharging. Physically, it lasts as long as the adhesive layer stays intact, which is typically several years. It's ultra-thin (under 0.5 mm), fits under most phone cases without adding bulk, and requires zero maintenance. One purchase, permanent use.
Where should I apply it?
Apply the sticker to a clean, dry, non-screen surface of the device you want to harmonize. The back of your phone case, the underside of your laptop, the back of your router, the back of your tablet, or one cup of your Bluetooth headphones. Do not apply directly to screens or display panels. Once placed, the sticker is designed for permanent placement and is not intended to be repositioned.
Does it work without a Schumann device?
Yes. The sticker provides localized EMF harmonization entirely on its own, no pairing required. That said, the sticker and the Schumann devices serve different purposes. The sticker works locally on the specific electronic device it's attached to. The V1 and V2 Pro create a low-frequency field across your room or workspace. Combining both gives you localized device protection plus a broader grounded environment, but each works independently.
Can I use more than one sticker?
Absolutely. Many customers apply one sticker per device. Phone, laptop, router, tablet. Some also double up on higher-output devices like Wi-Fi routers or smart TVs for added coverage. If you use multiple electronics throughout your day (most people do), a multi-pack lets you cover your whole setup rather than just one device.
Where can I find the user guide?
Every device ships with a printed Quick Setup Guide and Frequency Guide in the box. You can also download the full digital User Guide and Frequency Guide from your account at theschumann.com or by reaching out to support@theschumann.com.